Meat And Bone Separator
- Xiaojin
- Shijiazhuang China
- 1 month
1. It is for the operators who handle this machine read only.
2. Structure diagram：
①box part ② hopper part ③separation part ④speed reducer ⑤Motor ⑥Screw ⑦belt of motor ⑧ belt of speed reducer ⑨ triangle belt
Working principle：
After push by the shaft, to separate the bone and meat. Adjust the screw in the clockwise way, the gap should not too small, if so, the bone will block the filter easily, adjust in the anti-clockwise way, if the gap too big, then the bone may not complete separate.
Technical parameter:
1) Power supply：380v 50Hz
2) power：5.5kw
3) output speed：102r/min
4) output：900kg/h
5) external dimension：1437×555×1250（mm）
6) weight：500kg
Installation and testing
1) This machines should install in the smooth ground, the 4 legs should install properly.
2) Connect power wire correctly，must connect earth wire.
3) If there is any error with the machine, should shut down the power immediately.
Maintenance:
1) After work should clean the machine everyday，shut down the power while cleaning.
After clean, put oil for the shaft.
We are the biggest manufacturer for meat processing and sausage machines in China, you are welcome to visit our factory at any time....more
